FELCO 31

Made in Switzerland by FELCO

Product Information

  • In brief

    • Reliable: comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade made of high-quality hardened steel and screw-mounted adjustable brass anvil / clean, precise cut / all parts can be replaced
    • Efficient: easy cutting adjustment
    • Ergonomic: hand protection is provided by the ideal shape of the handles / non-slip coating
  • Recommended for

    Our recommendation(1: Recommended, 2: Strongly recommended, 3: Best fit)
    • Viticulture:*
    • Arboriculture:***
    • Horticulture:*
    • Parks and Gardens:**
    • Nursery:*
    • Small hand:*
    • Average-sized hand:**
    • Large hand:***
    • Right-handed:***
    • Left-handed:
  • FELCO technical specifications

    • Forged aluminum handles
      Forged aluminum handles

      Lightweight, strong and sturdy thanks to special aluminum alloys and advanced precision forging methods. Equipment comes with a lifetime guarantee*.


  • Accessories

  • Spare parts

    FELCOREF.DesignationCompositionPriceQuantity
    30/330/3Blade with washer1x 30/3 + 1x 30/25$14.31
    31/431/4Anvil with screws1x 31/4 + 1x 31/6 + 1x 31/7 + 2x 31/13$14.31
    30/9030/90Kit1x 30/8 + 1x 30/9 + 1x 30/25$5.94
    30/9130/91Kit2x 30/11$4.32
    30/9230/92Kit1x 2/13 + 1x 30/12 + 1x 2/14$3.72
    30/130/1Handle without blade1x 30/1 + 4x 7/5B + 1x 7/10 + 1x 6/35$19.86
    31/231/2Handle without anvil1x 31/2 + 1x 2/13 + 1x 30/12 + 1x 2/14 + 1x 7/36$20.52
    6/356/35Coating for blade handle1x 6/35$5.28
    7/367/36Coating for anvil-blade / anvil handle1x 7/36$5.28
    7/5B7/5BRivet for blade1x 7/5B
    31/631/6Screw for anvil 6 mm1x 31/6$0.48
    31/731/7Screw for anvil 8 mm1x 31/7$0.48
    30/830/8Bolt1x 30/8
    30/930/9Nut1x 30/9
    7/107/10Bush1x 7/10$2.97
    30/2530/25Washer1x 30/25$0.78
    31/1331/13Washer1x 31/13$0.27
    30/1130/11White spring1x 30/11
    30/1230/12Thumb catch1x 30/12$1.77
    2/132/13Spring for thumb catch1x 2/13$0.42
    2/142/14Screw for thumb catch1x 2/14$0.54
  • Maintenance

    • Cleaning

      It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

    • Oiling

      After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

    • Sharpening

      It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

    • Dismantling

      It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

  • Parts replacement

    • Changing the blade

      When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade over 2/3 of its length.

    • Changing the thumb catch

      When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

    • Changing the plastic coatings for handles

      If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.